Yashica’s ‘Sailor Boy’ – 1962

Yashica’s advertising figurine the ‘Sailor Boy’ first appeared in 1962 – closely associated with the launch of Yashica’s J-3 35mm single-lens reflex camera. It was made for Yashica by Modern Plastics of Japan and was produced in a variety of sizes – from a 20cm shop and dealer display model down to this little 10cm guy.

This one ⇓ came to our collection from Germany and man was he a dirty guy!

DSCF5218

Covered with a coat of nicotine and grime, he looked like he was in a bar room fight! But he has a good casting and the paint looks good. Notice how grungy his hat is.

DSCF5219

Since he was covered with a thin film of nicotine he was sticky!

DSCF5220

Looks like he has a black eye!

After some restoration work in the studio, he’s looking ⇓ much better and brighter.

DSCF5221

Nice and shiny! Still a hint of a black smudge near his right eye.

DSCF5222

His hat is white again. If you look to collect one, be sure to look closely at the hat. Often the casting will be a bit porous there and show some pitting. This one is nice and smooth.

DSCF5228

The manufacturer’s marks on the bottom. The round spot was meant to insert a small magnet so as to keep him in his place.

Made in Japan by Modern Plastics for Yashica. He’s never been given an official name from Yashica so we’ve always called him ‘Sailor Boy’ for obvious reasons. Some of the figurines will have ‘Yashica’ in katakana characters on the hat. We don’t have one like that – yet.

15133132085_d1fc422098_z

The 20cm shop model with the J-3. The eyelashes are different on the larger models otherwise they’re the same.

yashicasailorboys-japan-store

Not our collection! Wish it was! There is one missing – a 10 cm ‘Sailor Boy’ with green shoes otherwise this collection is complete. Notice the large doll on the back left does not have Yashica on his hat but does have green shoes. The one with the camera was released for the launch of the Yashica Electro 35 and as best as I can tell he’s modeled after Wee Willie Winkie from the Scottish nursery rhyme. These are on display at a Tokyo store that specializes in collectible figurines and dolls.

Thanks for your visit! And yes, we take donations of unwanted ‘Sailor Boys’!!! JK

Camera: Fujifilm FinePix S9900W

Chris

Pentamatic S – 1961

Yashica Pentamatic S with its no name clip-on light meter.

20150110_131631

S fitted with its light meter, lens hood and the standard 5.8cm f/1.7 lens that came with the Pentamatic II.

20150109_140503

Pentamatic S

20150110_131704

Standard lens for the Pentamatic II here fitted to the S – Auto Yashinon f/1.7 5.8cm made by Tomioka Optical.

The Yashica Pentamatic S was available in 1961 and came with the Auto Yashinon f/1.8 5.5cm lens.

Chris

Thank You!

Carol and I would just like to say thank you to everyone who’s stopped by our blog over these past 2 years! It’s been a pleasure sharing our little bits of knowledge with you all and what a joy it is to read your wonderful posts!

22273206491_6cb2ca1d6c_z

Die hard Mets fans and lifelong photographers – Chris and Carol.

What’s been reaffirmed for us is that the world isn’t falling apart – that it isn’t filled with just hateful people with horrible agendas. Caring people are everywhere…

Positive thoughts and actions, kindness, sincerity and charity to those less fortunate leads to true happiness in life (a loving partner helps to). An endless supply of old cameras to play with doesn’t hurt either!

To the amazing people who follow us, we hope we add a bit of fun to your day and maybe we’ve turned you onto an old Yashica or two along the way! The number of visits our blog gets from around the world just blows us away! It would be easier to list the countries that haven’t visited yet rather than the ones that have.

To the people we follow – thanks for sharing your knowledge with us and the rest of the blogging world! We’ve learned so much from your posts and marvel at the images in your blogs. Inspirational to say the least!

Thank you! Thank you! 

Chris and Carol ^.^

Yashica Flex AS-II by Yashima Optical

One of the original group of 6 cameras that Yashica (Yashima Optical Industries Company, Ltd.) made in the early to mid 1950s. This AS-II was introduced in 1954 and featured a built-in (well, attached) light meter. They’re solid cameras these early Yashica TLRs, and in our opinion, had some underrated features as well as great lenses. The light meter was made by Sekonic by the way.

20150105_155611

Yashica Flex AS-II with built-in light meter (just visible on the camera’s left side). The light meter’s cells were located under the nameplate and were exposed by lifting up the nameplate flap.

20150105_155832

The AS-II featured Yashimar lenses that were made by Tomioka Optical for Yashica. A Copal shutter with a blazing fast 1/200 top speed!

If you’re in the market for a vintage Yashica TLR then the AS-II should be on your list. Be advised that most will not have a working light meter – if you get one with one it’s a bonus. They are a bit hard to find – 63 year old cameras don’t often look this good or work perfectly. We were lucky as we were able to purchase this one from a collector in the US for a reasonable price.

Taken on the US Post Office steps in downtown Fernandina Beach, Florida. The post office dates to 1911.

Camera: Samsung Galaxy S4

Chris

Yashica TL Electro-X & the Danish Ads

One of our favorite cameras from Yashica (and my first) is the famous and highly popular Yashica TL Electro-X. Yashica had a major hit on their hands when it was introduced to much fanfare in the late 1960s. A fully electronic camera that featured a “IC Brain” that controlled exposure settings and shutter speeds could be timed from 2 seconds to 1/1000 second with infinite in between settings. The TL Electro-X was sold around the world for many years – actually up through the mid 1970s.

DSC07497

The TL Electro-X seen here as the ITS model.

24104907192_2909081390_o

Top plate spare part. The gothic ‘Y’ on the pentaprism was/is synonymous with the TL Electro-X body whether it was in pro black or traditional silver.

Yashica TL electro x 1972 8

Recently discovered Danish ad for the TL Electro-X. As the ads says, the “world’s most advanced SLR”.

The ad above was recently sent to me by my good friend Paul Sokk from Australia – http://www.yashicatlr.com – The ad is from June 1972 and what’s interesting to us is the missing gothic ‘Y’ on the pentaprism. Up until now we weren’t aware of any models without the ‘Y’. No big deal – it’s just a curious variation. We’ve also discovered that Yashica (for whatever reason) also had models that the traditional red ‘X’ was changed to black. See below.

img_20170228_0003

Camera on the left with what appears to be a black ‘X’ vice traditional red ‘X’.

Our best guess as to why the Danish ad has a TL Electro-X without the ‘Y’ would be that the local trading company or distributor wanted Yashica to supply cameras that were different than what was for sale in let’s say France or Germany. It’s not unheard of that Yashica supplied different distributors with slightly different body and lens sets. The Yashica J-P and its odd little 5cm f2.8 preset lens from 1964 comes to mind.

1969 April, Yashica TL Electro-X

April 1969 ad from a Danish photography magazine.

As always we endeavor to bring you the most accurate information about Yashica and its cameras. We welcome comments and of course, if something we’ve said is incorrect please let us know – or simply share additional info if you have some. Thanks

Chris & Carol

Yashica Moves to a New Factory 1972

We’ll be the first to admit – not an exciting title or topic for a blog. It may even be a stretch for a blog named the ‘Yashica Pentamatic Fanatic’. But we feel compelled to share information about the Yashica Company, however slight and trivial, with our dear readers.

Yashica’s first factory was along the shores of beautiful Lake Suwa in the small town of Suwa. The next location (from Yashica brochures) was in Shimosuwa-machi, Suwa-gun, Nagano Prefecture. This was the industrial campus of Yashica and it grew over the years to occupy almost every square meter of the property.

Yashica's Shimosuwa Factory

Opened in 1956 along the shores of Lake Suwa in Nagano.

IMG_20151218_0008 (2)

A different view of the same campus. Yashica was running out of room by the mid-1960s.

IMG_20170404_0004

Back cover of the Yashica TL Electro-X ITS instruction booklet. The booklet was printed in Japan in June 1972.

At the time of the printing of the above book, Yashica was operating 3 factories. The top line that begins with the Yashica ‘Y’ on the far left is the address of the main headquarters of Yashica which was in Shibuya-ku, Tokyo. The next line is the location of the Suwa plant – Shimosuwa. The third line is the new plant in Okaya which was still in Nagano Prefecture. The 4th line was an unknown (to us until recently) factory in Sagamihara-shi, Kanagawa Prefecture (southwest of Tokyo and just west of Yokohama). As you can see, Yashica operated at least 14 other sales offices and service centers across Japan in mid-1972.

IMG_20170404_0005

Back cover of the Yashinon Lenses & Accessories booklet printed in Japan in January 1973.

Between June 1972 (the first book above) and January 1973 (the second book above), Yashica closed its campus and factory in Shimosuwa. The only factories listed are the new Okaya factory and the Sagamihara factory. That was a big move for Yashica and as we understand it, they had purchased the old silk mill in Okaya as far back as 1959. As of this book, Yashica did not close any of its other sales offices listed from the previous book.

DSCF9431

The factory was officially dedicated in December 1972. According to Yashica documents, the factory didn’t achieve full production until late 1974 or early 1975.

IMG_20190517_0001 (1)

The Yashica Okaya factory complex in the summer of 1974.

Why is any of this important? It isn’t unless you’re a Yashica Fanatic like us. Oh, it did have a strong ripple effect on the company though. Japan was in a bit of an economic slowdown in the early 1970s and it came to a head in late 1974 for Yashica. Mismanagement and embezzlement (and the costly move) caused Yashica to lay off workers – unheard of in Japan at the time. They closed the Sagamihara factory which put 900 Yashica employees out of work. That had an effect on the factory at Okaya and Yashica was soon in deep financial trouble. Their cameras were still top notch but the first warning shots about their future were fired.

IMG_20190517_0003 (1)

It is my understanding that Mr. Shiro Kaneko was installed as the new president of Yashica by the Nissho-Iwai Company (Yashica’s distributor) and by the Taiyo Kobe Bank which by 1974 had put its full financial resources behind Yashica’s new marketing efforts.

Thanks for your visit! Hope you got a little something out of it. – Chris

 

Cocoa Beach Firefighters – 1972

Cocoa Beach, Florida firefighters, May 1972

As part of my college ‘Photographic Documentation’ classes at Hydrospace Technical Institute (a mouthful), I decided to join the Cocoa Beach Fire Department as a volunteer firefighter trainee in the Spring of 1972. The highly trained professionals at the station agreed to train me and allowed me to document their activities for my class. Since Cocoa Beach is so close to the Kennedy Space Center at Cape Canaveral, the firefighters at Cocoa Beach had access to better personal gear (Lexan helmets and other high tech safety equipment) than other departments that were not expected to respond to a rocket related mishap. I hope to post a series of images over the next few weeks as more will be discovered in my archives. I’m sorry to say that I do not have the names of the brave firefighters I have pictured. I will be sharing my images with the current personnel of the Cocoa Beach Fire Department via their Chief.

IMG_20170316_0022

IMG_20170316_0028

IMG_20170316_0027

IMG_20170316_0016

IMG_20170316_0017

IMG_20170316_0025

IMG_20170316_0019

My favorite truck. 1970 Chevrolet 4×4 Suburban Rescue Unit. Way cool!

21933932479_540973dd3f_o

Me and my favorite truck!

Camera:  Yashica TL Electro-X

Lens:  Auto Yashinon 50mm f1.7

Film:  Kodak Plus X Pan

Processing:  Self processing

Scanner:  Canon CanoScan 9000F Mark II

From a collection of recently ‘found’ negatives from 1972.

Many thanks to the personnel of the Cocoa Beach Fire Department for their expert training and friendly advice. They took the more than a few of us college kids in and it was a great experience for all. When I went on to join the U.S. Navy in 1975, I put my background in firefighting to good use aboard the three aircraft carriers that I served aboard.

 

Serious Photography!

15133132085_d1fc422098_z

If you’re a regular reader (or curious visitor) you’ve hopefully picked up that we (Chris & Carol) enjoy sharing images of cameras that have crossed our paths over these many years. You may have also noticed that while we post countless images of cameras, lenses and what not, we’re not overly technical when it comes to photo gear. We’re not going to “beat you over the head” with needless specs of the gear we share – just (hopefully) good imagery of the wide-world of  photography.

With that said, we’d like to share an image of a camera that never fails to make us smile –

25599964075_bb91c0ac63_o

Our son Timothy’s first (and only) camera – a Pikachu 35mm with genuine Pokemons inside! Tim just loved this camera and it’s an important part of our collection still.

23902504384_60e724c9f5_o

As always, many thanks for your visit. We hope it made you smile – after all, that’s what photography is all about…

Chris & Carol and Pikachu and Ash too!

Yashica Pentamatic S & a “new” old school copy stand –

Every now and then as a collector of all things Yashica, you get a little lucky. In this case my luck was finding an accessory that I wanted so badly back in the day (early 1970s). It’s not actually an accessory – more of what I’ll call ‘studio support equipment’.

dscf3748

Pentamatic S on the copy stand.

I know. It’s just a simple copy stand. They’re for sale everywhere. But not a built in 1971 Yashica branded copy stand – and in its original box too! Collector heaven.

20170301_092007

dscf3738

The grids are about 20 x 20 so it’s actually quite large.

dscf3743

img_20170228_0007

It’s definitely from another time and place. No official name for it – just a copy stand. It’s built pretty well – lots of real steel parts and no plastic. I believe the plastic looking parts are Bakelite. I’ll need to modify the tripod screw bracket a bit for use by my digital Fuji.